How to Read Your Bangle Size
In India, bangle sizes are written as two numbers, such as 2.4, 2-6 or 2/8. The first number is whole inches and the second is sixteenths of an inch, and together they give the bangle's inner diameter. So size 2.4 means 2 and 4/16 inches (2.25″, about 57.2 mm), size 2.6 means 2 and 6/16 inches (2.375″, about 60.3 mm) and size 2.8 means 2½ inches (about 63.5 mm). Because the second number counts sixteenths, the sizes after 2.8 are 2.10, 2.12 and 2.14, then 3.0. Some jewellers shorten 2.10 to "2.1", which looks smaller than 2.8 but is actually larger. The calculator spells every size out in millimetres so there is no confusion.
The snug fit result is the smallest common size that should still slide over your hand. The comfortable fit is one size up, which suits a looser look, warm weather or anyone whose hands swell during the day. If you measured a bangle you already own, the result is the nearest standard size, and when you fall between two sizes the calculator suggests the larger one, as most jewellers advise.
How the Calculator Works
- From a bangle: the inner diameter you measure is matched to the nearest standard size, where size a.b = (a + b ÷ 16) × 25.4 mm.
- From your hand: a rigid bangle has to pass over the widest part of your folded hand, so the minimum inner diameter is the hand circumference ÷ π (3.1416). The calculator picks the smallest standard size at least that wide.
- From a size label: it reads 2.6, 2-6 or 2/6 in the same way and shows the diameter, inches and circumference.
Worked example: your hand measures 188 mm around the knuckles with the thumb tucked in. 188 ÷ 3.1416 = 59.8 mm, so the bangle must be at least 59.8 mm wide inside. The smallest standard size that is at least that wide is 2.6 (60.3 mm), your snug fit; one size up, 2.8 (63.5 mm), is the comfortable fit.
How to Measure Your Bangle Size
- Best method – use a bangle that fits. Lay it flat on a ruler and measure straight across the inside, from inner edge to inner edge, through the centre. Don't include the thickness of the metal.
- Hand method. Bring your thumb towards your little finger, as if you were slipping on a bangle. Wrap a soft tape, string or paper strip around the widest part of your hand, across the knuckles and the base of the thumb. Keep it snug but not tight.
- Mark and measure. If you used string or paper, mark where it overlaps, lay it flat and measure the length in millimetres or centimetres.
- Enter the number in the calculator and compare the result with the true-size circle on your screen or a printed template.
Common Mistakes and Limits
- Measuring the wrist instead of the hand. A rigid bangle never needs to fit your wrist; it has to pass over your knuckles.
- Reading 2.10 as smaller than 2.8. It's the opposite: 2.10 is 66.7 mm, 2.8 is 63.5 mm.
- Assuming every brand is identical. Most published charts agree within about half a millimetre, but a few shops use their own scale. Always check the seller's chart before ordering, especially for gold.
- Printing at the wrong scale. Print the template at 100 % and check the 100 mm bar with a ruler; "fit to page" shrinks everything.
- Forgetting the style. Kadas and thick or square bangles feel tighter than thin round ones, so many people choose one size up. Openable bangles and kadas with screws are more forgiving.
The calculator gives a good estimate, but hands vary in shape and flexibility. If you can, try a bangle on in a shop or measure one that already fits you well; that remains the most reliable method. For rings, use our ring size converter, which converts between US, UK, EU and Indian ring sizes.
Frequently Asked Questions
What bangle sizes do adult women usually wear?
Indian jewellers' charts for adult women typically run from about 2.2 to 2.12. Where you fall depends on the width and flexibility of your hand, not your age or height, so measure rather than guess.
What is 2.6 bangle size in cm?
Size 2.6 has an inner diameter of 2⅜ inches, about 6.0 cm (60.3 mm), and an inner circumference of about 19 cm.
Is 2.4 or 2.6 bigger?
2.6 is bigger. The second number counts sixteenths of an inch, so each step of 2 adds 1/8 inch (about 3.2 mm) to the inner diameter.
How do I measure bangle size at home without a tape?
Wrap a strip of paper or a piece of string around your folded hand, mark the overlap and measure it against a ruler. Or measure the inside of a bangle that fits you. You can also use the true-size circle on this page after calibrating it with a bank card.
Should I choose the bigger size if I'm between two sizes?
Usually yes. A slightly loose bangle is comfortable and can be worn with others, while a tight one is hard to put on and may be impossible to remove if your hand swells.
Are bangle sizes the same for kids?
Children wear smaller sizes. CaratLane's chart, for example, starts at about 1.2–1.4 for babies up to 6 months and reaches 2.2–2.4 for children aged 7 to 12. Measure the child's folded hand in the same way, and choose openable bangles for babies and toddlers.
Is my measurement saved?
No. Everything is calculated in your browser. Only the screen scale is remembered, and only if you tick the box to save it on this device.
Sources
- CaratLane, The Ultimate Bangle Size Chart Guide for Indian Women – size 2.2 to 2.12 with diameters.
- Varniya, Bangle Size Guide – sizes 2-2 to 3 in mm and inches; measuring a bangle that fits.
- Jewelove, Bangle Size Chart – sizes 2.0 to 3.0 with inner diameter and circumference; hand method and diameter = circumference ÷ π.
- Wikipedia, ISO/IEC 7810 – ID-1 card format, 85.60 × 53.98 mm, used for the screen calibration.
Last reviewed: 12 October 2026. Size values are calculated from the inch definition and cross-checked against the jewellers' charts above, which agree to within about half a millimetre.