Concrete Volume Calculator

Work out exactly how much concrete to order for a slab, footing, post hole, sonotube or set of steps. Get the volume in cubic yards, cubic metres and cubic feet, the number of premix bags, the approximate weight and the ready-mix cost, in imperial or metric units.

  • 100% free
  • No sign-up
  • Private & local
  • Works on mobile

Private by design: every calculation runs locally in your browser. Nothing you type is sent to a server or stored by us.

What Is a Concrete Volume Calculator?

A concrete volume calculator works out how much concrete a project needs from its dimensions. Ordering the right amount matters. Order too little and you face a cold joint and a second delivery fee. Order too much and you pay for concrete you have to dispose of. Concrete is sold by volume, in cubic yards in the US or cubic metres elsewhere, or in premixed bags for small jobs, so the calculator gives you every figure you need to order confidently.

It handles the most common shapes: slabs (patios, driveways, shed bases), footings and walls, round columns and post holes, hollow tubes, and steps. Choose imperial or metric units, add a waste allowance, and see the volume, number of bags, approximate weight and optional cost.

How to Calculate Concrete

  1. Choose imperial or metric units.
  2. Select the shape and enter the dimensions. Thickness and diameters are in inches or centimetres, lengths in feet or metres.
  3. Set the quantity, for example 8 identical post holes.
  4. Add a waste allowance: 5–10% is typical.
  5. Read the total in cubic yards, cubic metres and bags.

Concrete Formulas

ShapeVolume formula
Slab or footinglength × width × thickness
Round columnπ × (diameter ÷ 2)² × height
Hollow tubeπ ÷ 4 × (outer² − inner²) × height
Stepssum of each step block: width × (rise × step number) × run

1 cubic yard = 27 cubic feet = 0.7646 cubic metres. A 10 × 10 ft slab 4 inches thick needs 10 × 10 × 0.333 = 33.3 ft³ = 1.23 yd³.

Bags or Ready-Mix?

  • Bagged concrete suits small jobs up to about 1 yd³ (0.75 m³): fence posts, pads, small repairs. An 80 lb bag makes about 0.6 ft³, so a cubic yard needs 45 bags.
  • Ready-mix trucks are more economical and consistent for larger pours, but many suppliers have a minimum order or a short-load fee.
  • Mix-on-site trailers are a middle option for 1–3 yd³ jobs.

Features

  • Five shapesSlabs, footings, columns, tubes and steps.
  • Imperial and metricRemembers your preferred units.
  • Bag counts40/60/80 lb or 20/25/40 kg premix bags.
  • Waste allowanceAdjustable extra percentage.
  • Weight and costApproximate tonnage and ready-mix cost.
  • Multiple poursQuantity for repeated elements like post holes.

Planning Your Concrete Pour

  • Prepare the base. Compact 4–6 inches (10–15 cm) of gravel sub-base for slabs, and use a vapour barrier indoors.
  • Reinforce. Rebar or welded wire mesh helps control cracking in slabs and driveways.
  • Check the forms. Make sure they're level, braced and exactly the depth you entered. A slab that's half an inch deeper than planned can need 10–15% more concrete.
  • Plan control joints at intervals of about 2–3 times the slab thickness in feet (e.g. every 8–12 ft for a 4-inch slab).
  • Watch the weather. Avoid freezing temperatures and very hot, windy days, which affect curing.
  • Cure properly. Keep the concrete moist for at least 7 days for full strength.

For large pours, arrange enough help and tools to place and finish the concrete before it starts to set, typically within 60–90 minutes of delivery.

Concrete Strength

Standard ready-mix for patios, paths and slabs is typically 25–30 MPa (3,000–4,000 psi). Driveways, garage floors and areas exposed to freeze-thaw cycles often use 30–35 MPa (4,000–5,000 psi) with air entrainment. Bagged concrete is labelled with its strength and yield, so check both when comparing brands, and ask your supplier for the right mix for your climate and use.

Tip: when ordering ready-mix, tell the supplier the job type, access for the truck, and whether you need a pump or wheelbarrows, and round your order up to the supplier's minimum increment rather than down.

Frequently Asked Questions

How much concrete do I need for a 10×10 slab?

At 4 inches thick, about 1.23 cubic yards, or about 1.36 with 10% extra. At 6 inches, 1.85 yd³.

How many bags of concrete make a yard?

About 45 bags of 80 lb, 60 bags of 60 lb, or 90 bags of 40 lb.

How thick should a concrete slab be?

4 inches (10 cm) is standard for patios and walkways; 5–6 inches (12–15 cm) for driveways and heavier loads.

How much extra concrete should I order?

Add 5–10% for uneven ground, spillage and form bulging.

How much does concrete weigh?

About 2,400 kg per cubic metre (4,050 lb per cubic yard).