What Is a Paint Coverage Calculator?
A paint coverage calculator estimates how much paint a job needs from the area to be painted, the number of coats and how far the paint spreads. Buying too little means a trip back to the store and a risk of colour mismatch. Buying too much wastes money and leaves tins to store or dispose of. Most interior wall paints cover about 10–12 m² per litre or 350–400 ft² per US gallon per coat on smooth, primed walls, and the exact figure is printed on the tin.
This calculator measures the four walls (and optionally the ceiling), subtracts typical door and window areas, multiplies by the number of coats and rooms, and adds a waste margin. It then suggests an efficient mix of can sizes, an optional primer quantity and a total cost.
How to Calculate Paint
- Measure the room's length, width and wall height.
- Count the doors and windows you won't paint over.
- Choose the number of coats: two is standard, and one may be enough for a refresh in the same colour.
- Enter the coverage rate from the paint tin.
- Tick the ceiling and primer if needed, and read the result.
The Paint Formula
Paint = (wall area + ceiling area − openings) × coats ÷ coverage. Wall area is 2 × (length + width) × height. For a 14 × 12 ft room with 8 ft walls: 2 × 26 × 8 = 416 ft², minus one door (21 ft²) and two windows (30 ft²) = 365 ft². Two coats at 375 ft²/gal need about 1.95 gallons, so buy 2 gallons plus a quart for touch-ups.
Typical Coverage Rates
| Surface / product | Metric | Imperial |
|---|---|---|
| Interior emulsion / latex, smooth walls | 10–12 m²/L | 350–400 ft²/gal |
| Ceiling paint | 10–12 m²/L | 350–400 ft²/gal |
| Primer / new plaster | 8–10 m²/L | 250–350 ft²/gal |
| Masonry / textured exterior | 5–8 m²/L | 150–250 ft²/gal |
| Gloss / trim enamel | 12–16 m²/L | 400–500 ft²/gal |
Features
- Walls and ceilingsPaint either or both.
- Openings deductedTypical door and window areas subtracted.
- Coats and roomsMultiple coats and identical rooms.
- Can suggestionsEfficient mix of 10 L/5 L/2.5 L/1 L or 5-gal/gallon/quart cans.
- Primer and costOptional primer and budget estimate.
- Metric or imperialLitres or US gallons.
Painting Tips for Better Coverage
- Prepare surfaces. Clean, fill and sand walls; paint spreads further and looks better on smooth, sound surfaces.
- Prime when needed. New plaster, bare wood, stains and dramatic colour changes all benefit from primer, which reduces the number of top coats.
- Use the right roller. A short nap for smooth walls, and a longer nap for textured surfaces (which use more paint).
- Don't over-thin. Thinned paint covers less and may need an extra coat.
- Box your paint. If a job uses several cans, mix them together in a bucket to avoid slight colour differences.
For trim, doors and skirting, estimate separately: a litre of gloss or satin enamel typically covers the trim of an average room with two coats.
Exterior Painting
For exterior walls, calculate each face as width × height, add gable triangles (half base × height), and subtract large openings. Rough surfaces such as render, brick and pebbledash absorb much more paint, often halving coverage, so use a lower coverage figure and consider a stabilising primer on chalky or porous surfaces.
Tip: keep a labelled jar of leftover paint with the colour code and date for future touch-ups.
Frequently Asked Questions
Does darker paint need more coats?
Deep and bright colours often need three coats or a tinted primer, especially when covering a light colour or vice versa.
How much paint do I need for a 12 × 12 room?
With 8 ft walls, one door, two windows and two coats, about 2 gallons (7–8 litres) for the walls, plus about 0.8 gallon for the ceiling.
How many coats of paint do I need?
Two coats for good, even coverage. Dark to light colour changes may need a primer plus two coats.
How many square feet does a gallon of paint cover?
About 350–400 square feet per coat on smooth surfaces; less on rough or porous surfaces.
Should I buy extra paint?
Yes. A 10% margin covers absorption and spills, and leftover paint is handy for touch-ups.
How do I measure a room with sloped ceilings?
Use the average wall height, or measure each wall's area separately and add them.