What Is a Lumber Size Converter?
A lumber size converter shows the difference between a board's nominal size, the name it's sold under, and its actual size, the real dimensions you'll measure. A "2×4" is actually 1½ × 3½ inches (38 × 89 mm). Boards are sawn to the nominal size while green, then dried (which shrinks them) and planed smooth on all four sides (S4S), so they lose material before reaching the store. Knowing actual sizes is essential for accurate plans, joinery, framing layouts and material estimates.
This free converter covers all common softwood dimensional sizes from 1×2 to 8×8, hardwood thickness "quarters" (4/4 to 16/4), metric equivalents, and includes a board foot calculator for pricing hardwood and estimating volume.
How to Use the Lumber Size Converter
- Choose softwood dimensional lumber or hardwood quarters.
- Pick the nominal size (e.g. 2×6) to see its actual dimensions in inches and millimetres.
- Use the board foot calculator with thickness, width, length and quantity to estimate volume and cost.
Nominal vs Actual Lumber Sizes
| Nominal | Actual (in) | Actual (mm) |
|---|---|---|
| 1×4 | 3/4 × 3 1/2 | 19 × 89 |
| 1×6 | 3/4 × 5 1/2 | 19 × 140 |
| 2×4 | 1 1/2 × 3 1/2 | 38 × 89 |
| 2×6 | 1 1/2 × 5 1/2 | 38 × 140 |
| 2×8 | 1 1/2 × 7 1/4 | 38 × 184 |
| 2×10 | 1 1/2 × 9 1/4 | 38 × 235 |
| 4×4 | 3 1/2 × 3 1/2 | 89 × 89 |
What Is a Board Foot?
A board foot is a unit of volume for lumber: a piece 1 inch thick, 12 inches wide and 12 inches long (144 cubic inches). Hardwood is usually priced per board foot, while softwood framing lumber is usually priced per piece or per linear foot. The formula is thickness (in) × width (in) × length (ft) ÷ 12, using nominal dimensions. For example, a 2×4 that is 8 feet long contains 2 × 4 × 8 ÷ 12 = 5.33 board feet.
Features
- 20 softwood sizesFrom 1×2 boards to 8×8 timbers.
- Hardwood quarters4/4 to 16/4, rough and surfaced thicknesses.
- Metric equivalentsActual sizes in millimetres.
- Board foot calculatorWith quantity, linear feet, volume and optional cost.
- FractionsActual sizes shown as familiar fractions.
- Great on the job siteFast and mobile friendly.
Metric Timber Sizes
Outside North America, timber is usually sold by its actual metric size. In the UK, common regularised or CLS (Canadian Lumber Standard) framing timber is 38 × 63 mm and 38 × 89 mm, close to the US 2×3 and 2×4. Sawn carcassing timber is sold as 47 × 100 mm, 47 × 150 mm and so on, and planed-all-round (PAR) boards are listed by nominal size with the actual size a few millimetres smaller. Across Europe, sizes such as 45 × 95 mm and 45 × 145 mm are typical for construction.
When following an American plan with metric materials, convert the actual dimensions (not the nominal ones) and check that joints, spacing and spans still work, because small differences add up across a frame. Structural spans must always follow local span tables and building regulations.
Tip: when buying boards for furniture, choose lumber a little larger than your finished dimensions so you can joint, plane and square it yourself, and let it acclimatise indoors for a week before cutting.
Tip: sheet goods follow similar rules. A sheet of "3/4 inch" plywood is often 23/32 inch (18.3 mm) thick, and "1/2 inch" is often 15/32 inch (11.9 mm), so measure before cutting dadoes and grooves.
Frequently Asked Questions
What is the metric equivalent of a 2×4?
A US 2×4 is 38 × 89 mm. The closest UK equivalents are 38 × 89 mm CLS or 47 × 100 mm sawn timber.
What are the actual dimensions of a 2×4?
1½ × 3½ inches (38 × 89 mm) for dry, planed lumber.
Why is lumber smaller than its nominal size?
It's cut to the nominal size while wet, then shrinks during drying and is planed smooth, removing about 1/4 to 3/4 inch.
What does 4/4 mean for hardwood?
4/4 ("four quarter") is 1 inch thick rough-sawn, usually about 13/16 inch after planing both faces.
How many board feet are in a 2×6×10?
2 × 6 × 10 ÷ 12 = 10 board feet.
Is pressure-treated lumber the same size?
Usually yes, though it may be slightly larger if wet when sold. Always measure for precise work.