Wallpaper Calculator

Find out how many rolls of wallpaper to buy. Enter your wall widths and height, the number of doors and windows, the roll size and the pattern repeat, and the calculator works out the strips needed, strips per roll and total rolls, including the extra length pattern matching uses.

  • 100% free
  • No sign-up
  • Private & local
  • Works on mobile

Private by design: every calculation runs locally in your browser. Nothing you type is sent to a server or stored by us.

What Is a Wallpaper Calculator?

A wallpaper calculator estimates how many rolls you need to paper a room. Calculating by area alone doesn't work well. Wallpaper is hung in vertical strips (drops) cut from rolls, the offcut at the end of each roll is often too short to use, and patterned papers need extra length so the design lines up across neighbouring strips. That's why this calculator works strip by strip, the way professional decorators do.

Enter the width of each wall, the height, and your doors and windows, choose the roll size (European, US or custom) and the pattern repeat and match type. You'll get the number of strips, how many strips each roll yields and the total rolls to buy, with an optional safety margin.

How to Calculate Wallpaper Rolls

  1. Measure the width of each wall you'll paper and enter them separated by commas.
  2. Measure the height from skirting board to ceiling (or to the picture rail).
  3. Enter the number of doors and windows.
  4. Choose the roll size and enter the pattern repeat from the label (0 for plain or random patterns).
  5. Read how many rolls to buy, and buy them all from the same batch number.

How the Calculation Works

  • Strip length = wall height + 10 cm (4 in) trimming allowance + pattern repeat.
  • Strips per roll = roll length ÷ strip length, rounded down.
  • Strips needed = total wall width ÷ roll width, rounded up.
  • Rolls = strips needed ÷ strips per roll, rounded up, plus your extra percentage.

Standard Roll Sizes

TypeWidthLengthCoverage
European standard53 cm10.05 mabout 5.3 m²
US double roll20.5 in33 ftabout 56 ft²
US wide27 in27 ftabout 60 ft²
Wide European70 cm10.05 mabout 7 m²

Features

  • Strip-based methodAccurate estimates like a decorator's.
  • Pattern repeatStraight and half-drop matches.
  • Doors and windowsDeducted sensibly.
  • Any roll sizeEuropean, US, wide or custom.
  • Safety marginAdd extra rolls for mistakes and future repairs.
  • Metric or imperialMetres or feet.

Wallpapering Tips

  • Check batch numbers on every roll before you start hanging.
  • Start at a focal point or in the corner least noticeable if the pattern won't match at the end.
  • Use a plumb line or laser level for the first strip, since walls and corners are rarely straight.
  • Cut strips in sequence and number them, especially with half-drop patterns.
  • Prepare the walls. Fill holes, sand, and apply a primer or sizing so the paper slides into place and can be removed later.
  • Keep offcuts for above doors, below windows and future repairs.

Feature walls are a great way to use bold, expensive papers. Enter just that one wall's width to see how few rolls you need.

Measuring a Room for Wallpaper

Measure the width of every wall you'll paper at its widest point, and the height from the top of the skirting board to the ceiling or cornice. For rooms with sloping ceilings or stairwells, measure the tallest part of each wall and treat it as a full-height wall. That slightly overestimates, which is safer than running short. For chimney breasts and alcoves, measure each face separately and add them to the wall list.

Tip: for ceilings, treat the ceiling as a wall: enter the room width as the "wall width" and the room length as the "height", since strips run across the shortest span.

Buying one spare roll beyond the estimate is a sensible insurance policy for patterned papers.

Frequently Asked Questions

How many rolls of wallpaper for a 12 × 14 ft room?

With 8 ft walls, one door and one window, US double rolls and a plain pattern, you need about 10–11 double rolls including a 10% margin (roughly 28 strips at 3 strips per roll).

What is a pattern repeat?

The vertical distance before the design repeats. Larger repeats waste more paper when matching strips.

What's the difference between straight and half-drop match?

In a straight match, the pattern lines up horizontally across strips. In a half-drop, every other strip is shifted by half a repeat, which needs more paper.

Why buy from the same batch?

Colours can vary slightly between print runs (batch or lot numbers), which shows on the wall.

Should I subtract doors and windows?

Yes, but conservatively. Strips above and below openings still need paper, so the calculator subtracts only part of their width.